For 250 g of cream
PHASE A
- 25g Olive oil
- 12.5g Jojob oil
- 12.5g Coconut oil
PHASE B
- 5g Cetearyl alcohol
- 186.25g Water
- 5g Olivem 1000
- 0.75g Xanthan gum
PHASE C
- 1.75g essential oil of your choice
- 1.25g Nobact preservative
A recipe for the whole family! A body milk that nourishes all skin types in the best way, leaving them soft and fragrant.
Preparation
1. Transfer phase B to a bowl (water + olivem 1000+ xanthan gum + cetearyl alcohol)
2. Heat phase B in a water bath or on a electric plate until all components are melted.
3. Slowly pour phase A into phase B, emulsifying with the blender for about 3 minutes when the mixture becomes homogeneous and opaque white.
4. Put the container in a bottom of cold water and continue stirring until completely cooled so that the mixture takes on body.
5. Add Phase C (the other ingredients) mixing with each addition.
Note: the pH of the preparation is approximately 5-5.5
Measure the ph using a ph meter or litmus papers, if the ph is not between 5-5.5 adjust it with:
- 30% caustic soda solution if the pH is less than 5
- lactic or citric acid if the ph is greater than 5.5
ATTENTION! Work with a graduated pipette and add a drop or two at a time!
How to use
Milk that deeply hydrates thanks to the three different oils inside and perfumes the body. It is suitable for all skin types, it is not particularly greasy, leaving the skin soft and fragrant. Use after a shower or even before going out.
